Exning Village Cinema

© Copyright  LAPOLLO Systems                 Enquiries to    cinema@exningcommunitychurchhall.org

How to play a Cassette

This guide shows “How to play a Cassette”. It assumes you have knowledge of Cassette players in general (Click on pictures to enlarge)

Turn on Booth Power

booth switch w.jpg

1 Go to the right hand side of the stage

2 Push down the switch marked "Booth Power"

3 Switch on power above the booth

Turn on Sound System

booth lid w.jpg

amp w.jpg

mixer w.jpg

4 Open booth lid and secure against wall. Open door.

5 Switch on amplifier

6 Switch on mixer
(ensure all slide controls are at 0)

mixer cassette w.jpg

7 Turn on Cassette player

8 Play tapes using buttons on the cassette player.
Control volume using slides "Channel 6" and "master"

At the end of your session carry out the following as applicable, depending on what you have used:

  • Remove cassette
  • Set all mixer slides to zero (Picture 8)
  • Switch off specific equipment used:  e.g. Cassette Player (Picture 7)
  • Switch off: mixer (Picture 6) amplifier (Picture 5);
  • Close Booth lid and door (Picture 4)
  • Turn off Booth Power above booth (Picture 3) and on stage (Picture 2).
Power Switches w.jpgcassette w.jpg