Exning Village Cinema

© Copyright  LAPOLLO Systems                 Enquiries to    cinema@exningcommunitychurchhall.org

How to play a CD

This guide shows “How to play a CD”. It assumes you have knowledge of CD/DVD players in general
(Click on pictures to enlarge)

Turn on Booth Power

booth switch w.jpg

1 Go to the right hand side of the stage

2 Push down the switch marked "Booth Power"

3 Switch on power above the booth

Turn on Sound System

booth lid w.jpg

amp w.jpg

mixer w.jpg

4 Open booth lid and secure against wall. Open door.

5 Switch on amplifier

6 Switch on mixer
(ensure all slide controls are at 0)

7 Turn on CD/DVD player "on"

8 Turn on the HDMI switch
(on front towards the DVD/CD player)

9 Point HDMI remote to select channel 1 by pressing the "1" button or pressing "M" until 1 selected.

10 Control volume using slides "Channel 7" and "master" and/or from your laptop controls

11 Use the CD/DVD remote to put CD in player using "Open/Close" and to play the CD

At the end of your session carry out the following as applicable, depending on what you have used:

  • Set all mixer slides to zero (Picture 10)
  • Remove CD
  • Switch off specific equipment used:  e.g. CD/DVD Player (Picture 7) and HDMI switch (Picture 8);
  • Switch off: mixer (Picture 6) amplifier (Picture 5);
  • Return remotes to their containers (for CD/DVD, HDMI switch)
  • Close Booth door and lid (Picture 4) Turn off Booth Power above booth (Picture 3) and on stage (Picture 2).
Power Switches w.jpghdmi switch w.jpghdmi front w.jpghdmi mixer w.jpgDVD w.jpghdmi remote dvd c.jpg